G70G80 Patient Monitor

G70/G80 Modular Patient Monitor

Philips Goldway G70 & G80 Patient Monitors


Product Description

  • Plug-and-play modular design provides patient care flexibility
  • 15″/17″ color TFT display
  • Maximum 10/12 waveforms display
  • 7-lead ECG or 12-lead ECG simultaneous display
  • ST and arrhythmia analysis
  • Hemodynamic, Oxygenation, Ventilation, Drug Dose Calculations
  • OxyCRG dynamic trend display
  • Bed-to-bed view
  • Applications from neonate to adult
  • LAN networking capability to UT4800 central monitoring system

Additional Information

Multi Parameter Module

dual-slot

ECG (Philips ECG Technology):

Lead type: 3-lead or 5-lead selectable, optional
12-lead
Lead selection:
3-lead: I, II, III
5-lead: I, II, III, aVR, aVL, aVF, V
12-lead: I, II, III, aVR, aVL, aVF, V1,
V2, V3, V4, V5, V6

HR Measurement Range:

Adult/Pediatric: 15 bpm – 300 bpm
Neonate: 15 bpm – 350 bpm
Accuracy: ±1 bpm or ±1 %, whichever is greater

ST measurement range: -2.5 mV – +2.5 mV
Accuracy: ±0.05 mV or ±15 %, whichever is greater

Arrhythmia: 21 calls

Waveform speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50mm/s

Gain selection: x 1/4, x 1/2, x 1, x 2, x 4, Auto

Pacemaker detection: Yes

Protection: Against electrosurgical interference and defibrillation.

ECG analog output

Non Invasive Blood Pressure (NIBP)

Method: Automatic oscillometric
Parameters: SYS/DIA/MAP/Pulse Rate
Operating mode: Manual/Auto/STAT

Auto measure intervals:
1-10, 15, 30, 60, 90, 120, 180, 240, 480 minutes

Units: mmHg/kPa

Cuff pressure range:
Adult/Pediatric: 0 – 300 mmHg (0 kPa – 40.0 kPa)
Neonate: 0 – 150 mmHg (0 kPa – 20.0 kPa)
Measurement and alarm range:

SYS: Adult/Pediatric: 30 – 255 mmHg (4.0 kPa – 33.9 kPa)
Neonate: 30 – 135 mmHg (4.0 kPa – 18.0 kPa)
DIA: Adult/Pediatric: 10 – 220 mmHg (1.3 kPa – 29.3 kPa)
Neonate: 10 – 110 mmHg (1.3 kPa – 14.7 kPa)
Accuracy: Max. Mean Error: ±5 mmHg (±0.7 kPa)

Max. Std. Deviation: 8 mmHg (1.1 kPa)
PR measurement range: 40 bpm – 240 bmp
Accuracy: ± 2 bpm or ±2 %, whichever is greater
Over-pressure protection: Yes

SpO2 (Philips SpO2 Technology)

Measurement range: 0 – 100 %
Accuracy: 70 – 100 %, depends on sensor
0 – 69 %, unspecified

Waveform speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50mm/s

PR measurement range: 30 – 300 bpm
Accuracy: ±1 bpm or ±2 %, whichever is greater

Respiration (RESP)

Measurement method: Thoracic impedance
Measurement range: Adult: 0 – 120 rpm
Pediatric: 0 – 150 rpm
Neonate: 0 – 170 rpm

Accuracy: ±1 rpm in the range of 0 – 70 rpm, ±2 rpm in the range of 71 – 120 rpm, ±3 rpm in the range of 121 – 170 rpm

Waveform speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s

Gain selection: x 1/2, x 1, x 2

Lead selection: RA – LA, RA – LL, LA – RL, LL – RL

Apnea alarm: Yes, 10 – 60 s

Temperature (TEMP, 2 Channel)

Measurement range: 0°C – 50°C (32°F – 122°F)
Resolution: 0.1°C (0.2°F)
Accuracy: ±0.1°C (±0.2°F)
Units: °C/°F

IBP (2 Channel, Optional)

Parameters: SYS/DIA/MAP/Pulse Rate
Measurement range: -50 – 400 mmHg (-6.6 kPa – 53.2 kPa)
Accuracy: ±4 mmHg (±0.53 kPa) or ±4 % of
reading, whichever is greater
Waveform speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s,
50 mm/s
Resolution: 1 mmHg (0.13 kPa)
Units: mmHg/kPa
Transducer sensitivity: 5 uV/V/mmHg

EtCO2 Module (single Slot) (optional)

Method: Microstream, infrared absorption
Parameters: RR, etCO2, inCO2
Measurement range: 0 – 99 mmHg (0 – 13.2 kPa)
Accuracy:
0 – 38 mmHg (0 kPa – 5.06 kPa): ±2 mmHg (±0.3 kPa)
39 – 99 mmHg (5.19 kPa – 13.2 kPa): ±5 % of reading + 0.08 %
for every 1 mmHg above 38 mmHg (5.2 kPa – 13.2 kPa: ±5 % of
reading + 0.08 % for every 0.13 kPa above 5.1 kPa)
Resolution: 1 mmHg (0.13 kPa)
Waveform speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s
Respiration rate: 0 – 150 rpm
Accuracy: ± 1 rpm in the range of 0 – 70 rpm
± 2 rpm in the range of 71-120rpm
± 3 rpm in the range of 121 – 150 rpm
Units: mmHg/kPa

ECG Analog Output (optional)

Parameters: SYS/DIA/MAP/Pulse Rate
Measurement range: -50 – 400 mmHg (-6.6 kPa – 53.2 kPa)
Accuracy: ±4 mmHg (±0.53 kPa) or ±4 % of
reading, whichever is greater
Waveform speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s,
50 mm/s
Resolution: 1 mmHg (0.13 kPa)
Units: mmHg/kPa
Transducer sensitivity: 5 uV/V/mmHg
Cardiac Output Module (single-slot)
Measurement method: Right heart thermodilution
Measurement range: 0.1 l/min – 20.0 l/min
Accuracy: ±0.2 l/min or ±10 %, whichever is
greater
Blood temperature range: 27°C – 43°C (80.6°F – 109.4°F)
Accuracy: ±0.1°C
Injection Temperature: 0°C – 27°C (32°F – 80.6°F)
Units: °C/°F

Multi Gas Module (triple Slot) (optional)

(Manual Agent ID or Auto Agent ID with O2)
Waveform speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50
mm/s
O2 measurement range: 0 Vol.% – 100 Vol.%
Accuracy: 0 – 40: ± 1 Vol.%
40 – 60: ± 2 Vol.%
60 – 80: ± 3 Vol.%
80 – 100: ± 4 Vol.%
N2O measurement range: 0 Vol.% – 100 Vol.%
Accuracy: 0 – 20: ± 2 Vol.%
20 – 100: ± 3 Vol.%
CO2 measurement range: 0 % – 10 % (0 mmHg – 100 mmHg)
Accuracy: 0 – 1: ± 0.1 %
1 – 5: ± 0.2 %
5 – 7: ± 0.3 %
7 – 10: ± 0.5 %
> 10: unspecified
Enflurane / Isoflurane/ Halothane measurement range:
0 Vol.% – 5 Vol.%
Accuracy: 0 – 1: ± 0.15 %
1 – 5: ± 0.2 %
> 10: unspecified
Sevoflurane measurement range: 0 Vol.% – 8 Vol.%
Accuracy: 0 – 1: ± 0.15 %
1 – 5: ± 0.2 %
5 – 8: ± 0.4 %
> 8: unspecified
Desflurane measurement range: 0 Vol.% – 18 Vol.%
Accuracy: 0 – 1: ± 0.15 %
1 – 5: ± 0.2 %
5 – 10: ± 0.4 %
10 – 15: ± 0.6 %
15 – 18: ± 1%
> 18: unspecified

Flexible Module Server (optional)

8 module slots
1.1m connection cable to monitor

Recorder (optional)

Type: Built-in thermal recorder, 3 channels
Print mode: Real-time recording, timed recording,
alarm-activated recording
Print speed: Auto, 12.5 mm/s, 25 mm/s, 50 mm/s

Display

Type: Color TFT LCD
Size: 15″/ 17″
Resolution: 1024 x 768 pixels (G70)
1280 x 1024 pixels (G80)
Channels: Max.10/12 channels

Power Supply

Power Supply
AC power input: 100 V – 240 VAC, 50/60 Hz
Battery (optional): Li-Ion battery, ≥2 hours of continuous
monitoring (with ECG, SpO2
measurement and NIBP measured
every 15 minutes)

Weight & Dimensions:

Main unit net weight: Approx. 9kg/10kg (with Multiparameter
Module, without recorder
and battery)
Main unit dimensions: 400 mm (W) x 192 mm (D) x 366 mm (H)
FMS net weight: Approx. 2 kg (without modules)
FMS dimensions: 437 mm (W) x 138 mm (D) x 134 mm (H)

Safety Approval & Quality System

Safety standard: IEC 60601-1
Quality system: ISO 9001 & ISO 13485 certified
CE marking according to the Council Directive 93/42/EEC

Data Review And Storage:

1600 sets trend table
1200-hour trend data of all parameters (with Data Manager
function)
120-minute full disclosure ECG 1 waveform review (with Data
Manager function)
200 sets alarm events
200 sets arrhythmia events

External Interface (standard)

Digital video output, FMS interface, Nurse Call, LAN, USB

Reviews

There are no reviews yet.

Be the first to review “G70/G80 Modular Patient Monitor”